50 Furnace Array using Carpet Duping for Fuel

## Designer - @Sam. ## Credits - 2x loader by @Scorpio - 2x unloader by samosthesage - Cart yeeteing setup by @Inspector Talon - Thanks to @Misinformation enjoyer and @Redstonia_ for their help with the carpet duper. ## Versions - 1.19+ ## Rates 18k/h (2x hopper speed) ## Description - The array is not hopper locked but you could invert the signal from the carpet duper and power the furnaces, alternating between redstone and repeaters, to lock most of the hoppers. - The shulkerbox input can not handle mixed items and any non full shulkerboxes will have to be manually ejected. - Mixed item rates might be lower as the top and bottom carts are not perfectly timed. This can be negated with hoppers under the furnaces. ## Instructions ### Build - When you first make the array, run the duper with no items to prefill all the hoppers with carpets. - To align the hopper cart in the unloader 1. Break the piston and curved rail 2. Place a wall/fence/glass pane above the hopper (where you just broke the rail) 3. Place and push the cart against the wall 4. Replace everything - If you rotate the array ccw 90 or cw 180, change this rail (refer to figure 3) to be slanted.